Stepper motor NEMA 23: 200 Steps, 56x56mm, 3,0A - Watterott electroni

Nema 23 stepper motor - 23HS6430 Size         56x56mm Weight 680g Shaft diameter 6,35mm Sabel length 300mm Steps 200 current 3,0A Phase resistance 0,8 Ohm I

1.9Nm(269oz.in) holding torque Single Shaft 6.35mm diameter NEMA 23 bipolar 2.24x2.24x3.0 4-wire 1.8 deg. step angle(200 steps/rev) Rated current

STEPPERONLINE Nema 23 Stepper Motor 3.0A 269oz.in/1.9Nm 76mm Length Step Motor for CNC Mill Lathe Router

Nema 23 Stepper Motor, 2 Phase, 3.5A, 2.2N·m

This is one of the most popular Nema 23 stepper motor, it with step angle 1.8deg and size 57x57x76mm. It has 4 wires, each phase draws 3A, with

Nema 23 Bipolar 1.8deg 1.89Nm(267.65oz.in) 3A 57x57x76mm 4 Wires

Stepper motor NEMA 23: 200 Steps, 56x56mm, 3,0A - Watterott electroni

STEPPERONLINE Nema 23 CNC Stepper Motor 2.8A 178.4oz.in/1.26Nm CNC Stepping Motor DIY CNC Mill

HobbyUnlimited NEMA 23 Stepper Motor 4.2A 3.0Nm (425oz.in) 100mm Length with 8mm Shaft for CNC Mill Lathe Router

TSM25 - Permanent Magnet (PM) Stepper Motors

This is one of the most popular Nema 23 stepper motor, it with step angle 1.8deg and size 57x57x56mm. It has 4 wires, each phase draws 2.8A, with holding torque 1.2Nm(169.93oz.in).

STEPPERONLINE NEMA 23 CNC Stepper Motor 2.8A 178.5oz.in/1.26Nm CNC Stepping Motor DIY CNC Mill

Nema 23 Stepper Motor, 3 Phase, 5.3A, 0.9N·m

Stepper Motor Nema23 (SY57STH56) - Planet CNC

STEPPERONLINE 3PCS Nema 23 CNC Stepper Motor 2.8A 1.26Nm/178.4oz.in 56mm Bipolar for Hobby CNC Kit

This NEMA 23-size hybrid stepping motor can be used as a unipolar or bipolar stepper motor and has a 1.8° step angle (200 steps/revolution). Each

Stepper Motor: Unipolar/Bipolar, 200 Steps/Rev, 57×56mm, 3.6V, 2 A/Phase

1.9Nm(269oz.in) holding torque Single Shaft 6.35mm diameter NEMA 23 bipolar 2.24x2.24x3.0 4-wire 1.8 deg. step angle(200 steps/rev) Rated current

STEPPERONLINE Nema 23 Stepper Motor 3.0A 269oz.in/1.9Nm 76mm Length Step Motor for CNC Mill Lathe Router