MG Chemicals 843AR-3.78L Silver Coated Copper Conductive Coating – MTESolutions

Super Shield Silver Coated Copper Conductive Coating, 1 Gallon Liquid
MG Chemicals 843AR-3.78L, Super Shield Silver-Coated Copper Conductive Paint, 3.6L Can, Case of 1 This copper conductive paint for plastic consists of a 1-part, solvent-based acrylic lacquer, pigmented with a highly conductive silver-coated copper flake. It is smooth, hard, and abrasion resistant. It is a ready-to-spray system, with no let down necessary. It has a quick dry time, with no heat cure necessary. It adheres strongly to most injection-molded plastics, such as ABS, PVC, nylon and polycarbonate. Copper conductive paint is mostly used to provide a conductive coating for the interior of plastic enclosures to suppress EMI / RFI emissions. It excels when higher levels of shielding are required, providing nearly the same performance as a silver filled coating, but at a significantly lower cost. UL Recognized (File # E202609) Provides effective EMI/RFI shielding over a broad frequency range Mild solvent system, safe on polystyrenes HAP free—does not contain toluene, xylene or MEK Available in aerosol format (see separate TDS) Technical Data Sheet Safety Data Sheet Not for Use as Architectural Coatings in Canada, California, and other States with similar VOC regulations. For Architectural Applications, use our water based conductive coatings. Part # Net Vol. Net Wt. Packaging 843AR-3.78L 3.60 L 3.93 kg Can

mg Chemicals 843WB-150ML Water Based Silver Coated Copper Conductive Coating

MG Chemicals 842AR-15ML Silver Print (Conductive Paint), 12 ml: : Industrial & Scientific

843AR-340G MG Chemicals, RF and Wireless

Provides very effective emi/rfi shielding over a broad frequency range Volume resistivity of 0.00047 Ω·cm Quick dry time, not heat cure required, easy

MG Chemicals 843AR Super Shield™ Silver Coated Copper Conductive Paint for EMI Shielding, 12 Oz Aerosol Can

843AR-340G MG Chemicals, RF and Wireless

MG Chemicals 843WB, Electromagnetic Shielding Paint – MTESolutions

Provides very effective emi/rfi shielding over a broad frequency range Volume resistivity of 0.00047 Ω·cm Quick dry time, not heat cure required, easy

MG Chemicals 843AR Super Shield™ Silver Coated Copper Conductive Paint for EMI Shielding, 12 Oz Aerosol Can

This electrically conductive silver epoxy allows for quick, cold-soldering repairs. It is considered a solder replacement epoxy for bonding heat-sensitive electronic components, or for making conductive connections where soldering is not an option, such as when bonding to glass, soft metals, or plastics. High electrical conductivity Convenient 1 to 1 mix ratio Cures at room temperature SVHC free Long shelf life.

mg Chemicals 8331D-14G Silver Conductive Epoxy

The 841AR-P Nickel Conductive Pen is a highly conductive, fast drying paint in a convenient pen format. It quickly and easily creates durable, reliable, corrosion resistant, and highly conductive traces. It adheres to a wide variety of substrates. This product works best on smooth, flat, and hard surfaces. It has a valve tip that opens when the pen is pressed against the surface to be drawn on and it has a soft tube, so the flow may be controlled by squeezing the center of the pen.

mg Chemicals 842AR-140G Silver Conductive Coating

mg Chemicals 843AR-3.78L Super Shield Silver Coated Copper Conductive

MG Chemicals - 843AR-3.78L - Conductive Coating, Silver Coated Copper, Super Shield, Light Metallic Brown - RS