Trova

Raspberry Pi Pico Raspberry Pi Pico (without Headers) — Little Bird

€ 4.00 · 5 (790) · In Magazzino

The real story is: Just like another “fruit company”, Raspberry Pi dove headfirst and  developed their own custom ARM silicon, the RP2040 (learn more about the RP2040)! Raspberry Pi Pico has been designed to be a low cost yet flexible development platform for RP2040, with the following key features: RP2040 microcontrol


The real story is: Just like another “fruit company”, Raspberry Pi dove headfirst and  developed their own custom ARM silicon, the RP2040 (learn more about the RP2040)!

Raspberry Pi Pico has been designed to be a low cost yet flexible development platform for RP2040, with the following key features:
  • RP2040 microcontroller with 2MByte Flash
  • Micro-USB B port for power and data (and for reprogramming the Flash)
  • 40 pin 21x51 'DIP' style 1mm thick PCB with 0.1 through-hole pins also with edge castellations

    • Exposes 26 multi-function 3.3V General Purpose I/O (GPIO) ◦ 23 GPIO are digital-only and 3 are ADC capable
    • Can be surface mounted as a module
  • 3-pin ARM Serial Wire Debug (SWD) port
  • Simple yet highly flexible power supply architecture

    • Various options for easily powering the unit from micro-USB, external supplies or batteries
    • High quality, low cost, high availability
  • Comprehensive SDK, software examples and documentation
For full details of the RP2040 microcontroller please see the RP2040 Datasheet, however the headline features are:
  • Dual-core cortex M0+ at up to 133MHz

    • On-chip PLL allows variable core frequency
  • 264K multi-bank high performance SRAM
  • External Quad-SPI Flash with eXecute In Place (XIP)
  • Dual-core cortex M0+ at up to 133MHz

    • On-chip PLL allows variable core frequency
  • 264K multi-bank high performance SRAM
  • External Quad-SPI Flash with eXecute In Place (XIP)
  • High performance full-crossbar bus fabric
  • On-board USB1.1 (device or host)
  • 30 multi-function General Purpose IO (4 can be used for ADC)

    • 1.8-3.3V IO Voltage (NOTE Pico IO voltage is fixed at 3.3V) • 12-bit 500ksps Analogue to Digital Converter (ADC)
  • Various digital peripherals
    • 2 x UART, 2 x I2C, 2 x SPI, up to 16 PWM channels
    • 1 x Timer with 4 alarms, 1 x Real Time Counter • Dual Programmable IO (PIO) peripherals
    • Flexible, user-programmable high-speed IO
    • Can emulate interfaces such as SD Card and VGA

Pico provides minimal (yet flexible) external circuitry to support the RP2040 chip (Flash, crystal, power supplies and decoupling and USB connector). The majority of the RP2040 microcontroller pins are brought to the user IO pins on the left and right edge of the board. Four RP2040 IO are used for internal functions - driving an LED, on-board Switched Mode Power Supply (SMPS) power control and sensing the system voltages.
Pico has been designed to use either soldered 0.1 pin-headers (it is one 0.1 pitch wider than a standard 40-pin DIP package) or can be used as a surface mountable 'module', as the user IO pins are also castellated. There are SMT pads underneath the USB connector and BOOTSEL button, which allow these signals to be accessed if used as a reflow- soldered SMT module.

Waveshare CAN Bus Module (B) for Raspberry Pi Pico Enabling Long Range SPI

Raspberry Pi Pico W comes with a wireless communication module. The wireless module hardware uses Infineon's CYW43439 wireless chip, which supports

waveshare Pre-Soldered Header Raspberry Pi Pico W, Built-in WiFi Support 2.4 GHZ Wi-Fi 4, Based on Official RP2040 Dual-Core Processor,Dual-core Arm

How to solder GPIO pin headers to Raspberry Pi Pico — The MagPi magazine

Raspberry Pi Pico with Pin Headers - Assembled – Kitronik Ltd

RPI Pico not working after soldering Pin Headers : r/AskElectronics

Raspberry Pi Pico H — Little Bird

How to Solder Header Pins to the Raspberry Pi Pico

GPIO Expander For Raspberry Pi Pico, 1x Raspberry Pi Standard 40PIN, 1x Pico 2×20PIN

Adding Headers to a RaspberryPi Zero without soldering //How-to

New Flexible Microcontroller Board --- Raspberry Pi Pico is a tiny, fast, and versatile board. It's based on RP2040 chip, which features a dual-core

KEYESTUDIO Raspberry Pi Pico Basic Starter Kit with Headers Micro USB Cable, Pico RP2040 Microcontroller, Flexible 26 Multifunction GPIO Pins

Raspberry Pi Pico Upgrade Number1 - Snazzy Header Pins!

Raspberry Pi Pico is the first product built on silicon designed in-house at Raspberry Pi. The board is programmable in MicroPython or C/C++.

Raspberry Pi SC0915 Single Board Computers