PoE Splitter/Voltage Converter

POE splitter.48VDC 802.3af POE input and Dual output 802.3af or 12VDC output. 15W. 5.5x2.1 connector

PoE Splitter/Voltage Converter

PoE Power Splitter

POE-162S IEEE 802.3at Gigabit Power over Ethernet Plus Splitter (12V/24V) - Planet Technology USA

UCTRONICS USB-C PoE Splitter Gigabit, PoE to USB-C 5V/4A Power Supply for Raspberry Pi 4 and More, 802.3at Power Over Ethernet to USB Type-C Adapter

PoE Splitter. GigE. 48VDC 4 pair 802.3at/bt PoE input, 24VAC @ 3.3A 80W wire terminal output

POE-SPLT-4824AC-GBT | Gigabit PoE Splitter/Voltage Converter, 48VDC 4Pair 802.3at/bt, 24VAC Output, 80W

GigE PoE Splitter/Voltage Converter, overloaded circuits poe

PoE-S911 PoE splitters enable data terminals that were not originally designed to accept power from the Ethernet, to be powered by Power over Ethernet mid-spans. The PoE splitter can power devices such as WiMAX CPEs, small WiMAX base-stations, 802.11n Access-Points, Thin-Clients, PTZ (Pan/Tilt/Zoom) IP Cameras, Video-Phones and more.

CENTROPOWER Active PoE Splitter Power Over Ethernet 5V 2A

The GAT-24v25w splitter provides 25 watts of continuous 24 volt power to any device. Use with your existing 802.3at PoE+ Switch or 48v PoE Injector to power devices like Legacy Ubiquiti 24-volt passive devices. p Simple application and installation will allow you to instantly convert 802.3at PoE+ to 24 volts with divided gigabit data.

PoE Texas 802.3at to 24-Volt Converter Easily Mix and Match 802.3at and 24-Volt Devices

The POE-PA2 is a passive PoE injector / splitter system that supports 5v - and up to 50 volt power over Ethernet transmission over CAT-5 cable.

POE-PA2 Passive PoE Injector, Splitter 12V, Splitter 5V, Up to 50 Volt

48V to 24V POE converter 24V 24W POE splitter for 24V passive POE MikroTik Accessories - AliExpress

Gigabit 802.3at 24Watt PoE Kit (Splitter + Injector) 12V 2A Power Over Ethernet

Active POE Splitter compatible with all Amcrest/Foscam IP Cameras The Active PoE Splitter splits a networked PoE signal into a separate power and ethernet data source. This device allows you to run ethernet cables from a POE Switch over long distances, and then split the PoE signal into a separate data and power sources in order to run non-PoE devices. This active PoE splitter can output voltages of 5V, 9V or 12V which makes it compatible with all Amcrest/Foscam IP Cameras.

Amcrest Active PoE Splitter Adapter, Up to 100 Meters, 5V / 12V Output