€ 9.00 · 4.8 (717) · In Magazzino
Tangle Free & No Plugging Better flow of SUNLU no plugging premium 1.75mm PETG filament. It has consistent diameter & roundness, less stringing and warping, strong layer adhesion. Article-free and impurity-free.High Precision +/- 0.02mm Tolerance 1.75mm PETG 3D filament(Tolerance Level : ? 0.02mm). Full 1KG 3d printer filament reel, perfect roundness and very tight diameter tolerance , approximately 325 m of filament on each spool ease of use, minimal warping, no clogging, no bubbles. Increase your 3d printing objects delicacy.Rigid, Tough, High Performance 3D Printing Material 3d filament PETG 1.75 is a rigid, tough, high performance material, offering excellent clarity, light transmission and high gloss. It's about as stiff as PLA. and is highly resistant to temperatures at above 60?C(140?F).Recommended Printing Temp/Nozzle Temperature PETG 3d filament suggest printing temperature is 220-250?C - Base Plate Temperature: 70-80?C if no glue applied.99% FDM 3D Printer High Compatibility Compatible with 99% FDM 3D printers (with heated beds): Reprap, Afinia, MakerBot, PrintrBot, UltiMaker, Airwolf, Makergear, Up!, Lulzbot, Flashforge, Solidoodle, Delta, Mbot, Type A.SUNLU PETG 3D Printer FilamentSUNLU PLA Filament is are made of premium PLA material (Polylactic Acid), which boasts complete biodegradation and lower melting temperature, even does not need a heated bed, with no odor during the printing.It is suitable for fast printing and printing large-sized models, printed products have flat and smooth surfaces.FAQWhy can't the filaments stick to the hotbed easy?1). Check the temperature setting before printing, PETG filament temperature about 220-250;2). Check if the plate surface has been used for a long time, it is recommended to apply PVA glue;3). If the first layer has poor adhesion, it is recommended to re-level the print substrate to reduce the distance between the nozzle and the surface plate;
Tangle Free & No Plugging Better flow of SUNLU no plugging premium 1.75mm PETG filament. It has consistent diameter & roundness, less stringing and warping, strong layer adhesion. Article-free and impurity-free.High Precision +/- 0.02mm Tolerance 1.75mm PETG 3D filament(Tolerance Level : ? 0.02mm). Full 1KG 3d printer filament reel, perfect roundness and very tight diameter tolerance , approximately 325 m of filament on each spool ease of use, minimal warping, no clogging, no bubbles. Increase your 3d printing objects delicacy.Rigid, Tough, High Performance 3D Printing Material 3d filament PETG 1.75 is a rigid, tough, high performance material, offering excellent clarity, light transmission and high gloss. It's about as stiff as PLA. and is highly resistant to temperatures at above 60?C(140?F).Recommended Printing Temp/Nozzle Temperature PETG 3d filament suggest printing temperature is 220-250?C - Base Plate Temperature: 70-80?C if no glue applied.99% FDM 3D Printer High Compatibility Compatible with 99% FDM 3D printers (with heated beds): Reprap, Afinia, MakerBot, PrintrBot, UltiMaker, Airwolf, Makergear, Up!, Lulzbot, Flashforge, Solidoodle, Delta, Mbot, Type A.SUNLU PETG 3D Printer FilamentSUNLU PLA Filament is are made of premium PLA material (Polylactic Acid), which boasts complete biodegradation and lower melting temperature, even does not need a heated bed, with no odor during the printing.It is suitable for fast printing and printing large-sized models, printed products have flat and smooth surfaces.FAQWhy can't the filaments stick to the hotbed easy?1). Check the temperature setting before printing, PETG filament temperature about 220-250;2). Check if the plate surface has been used for a long time, it is recommended to apply PVA glue;3). If the first layer has poor adhesion, it is recommended to re-level the print substrate to reduce the distance between the nozzle and the surface plate;
SUNLU PETG 3D Printer Filament Bundle, Neatly Wound Filament 1.75mm, 2kg in Total, 0.25kg per Spool, Individually Vacuum Packed, 8 Colors, Black+Clear(Yellow+Blue+Green+Purple Blue+Red+Orange+White) : Industrial & Scientific
Elevate your 3D printing experience with our PLA+ series 3D printer filaments. Experience the perfect balance of print quality, and eco-friendly materials.
Over 6kg of PLA Filament & PLA Plus 3D Filaments, 1kg/2.2lbs Australia / PETG / Grey
Achieve unique wood textures with wood PLA while ensuring strength and reliability. Elevate your 3D prints with our Wood PLA, PLA and PLA Mate.
SUNLU 3D Print Filament PLA, PETG, ABS - 10kg Bundle Pack USA / PLA / Black 1KG*10Rolls
Petg 3d Printer Filament Sunlu Super Neat Filament Spool - Temu
Over 3kg Bundle PETG 1.75mm Filament 1kg/2.2lbs, Best PETG Filament. USA / PETG Orange
SunLu PETG Filament 1.75mm Rainbow – DIY Electronics
SHOP BEST PETG TRANSPARENT RED - 1.75MM, 1 KG SPOOLS – 3DFILAMENTS – 3DFilaments
SUNLU 3D Printer Filament, 250G PETG Filament Bundle, 1.75mm PETG Filament Muticolor, High Toughness, Neatly Wound Filament, 250G Spool, 8 Rolls, Black+White+Grey+Transparent+Blue+Green+Red+Orange : Industrial & Scientific
Micro Center Inland Matte PLA 3D Printer Filament, Matte Red 3D Printing Filament 1.75mm, 1kg Cardboard Spool (2.2 lbs), Dimensional Accuracy +/- 0.03mm, FDM/FFF 3D Printers : Industrial & Scientific
SUNLU 1KG Red PETG 3D Printer Filament 1.75mm PETG Red 1KG No Bubble +/-0.02mm
SUNLU 3D Printer Material PETG 1.75MM With Spool High Strength No Bubble 3D 10 Rolls/set Filament PETG Filament 10kg
Creality Quality Assurance】Creality PETG combines the benefits of PLA and ABS to reach Eco-friendly and odorless performance.
Official Creality PETG 3D Printer Filament 1.75mm 1kg (2.2lbs) Red
PETG Filament for 3D Printer, JAMG HE 1.75mm 1KG Precision +/- 0.02 mm PETG Filament Spool for 3D Printing Refills (Clear) : Industrial & Scientific
SunLu Silky PLA+ Filament